cant streamin???

      cant streamin???

      is this right cant get that to work at streaming

      ;Update PB first
      pb_sv_update

      ;Clears current config, if using PBBans add their config to the end!
      pb_sv_FileEmpty
      pb_sv_TaskEmpty
      pb_sv_cvarempty
      pb_sv_md5toolempty
      pb_sv_NameLockEmpty

      ;Stream to ACI
      pb_sv_logaddr "69.39.237.211"
      pb_sv_logport 13750
      pb_sv_loguser "AAPGACI"

      ;General Settings
      pb_sv_CQC 0
      pb_sv_NoGuidGrace 1
      pb_sv_restrictions 2
      pb_sv_dupNameGrace 1
      pb_sv_changePeriod 900
      ; Limits the minimum name length of any player to 3.
      pb_sv_MinName 3
      ; Prevents the use of 'empty' names
      pb_sv_emptyname 0
      ; Prevents players from logging in with an invalid name or with non-standard characters
      pb_sv_extChar 0
      pb_sv_guidRelax 0
      pb_sv_changeMax 999
      ;Prevent more than 6 simultaneous players from updating PB when joining the server
      pb_sv_MaxConDls 6
      ;Server is running in "Global" mode. Change to 1 if auth goes down or the server is set to LAN.
      pb_sv_lan 0
      ;Automatically update pbbans.dat when you issue the pb_sv_ban command
      pb_sv_autoUpdBan 1
      ;Kick players for 2 minutes on cvar violation. Change to any value you wish
      pb_sv_kicklen 2
      ;Re-scan 1 CVAR per minute.
      pb_sv_CvarFreq 1
      pb_sv_cvarwalk 1
      ; Optimize the server by cycling every 100 milleseconds instead of 10, reduces lag.
      pb_sv_Sleep 100

      ;PBSS Settings - adjust to your requirements
      pb_sv_AutoSs 1 // 0=No, 1=Yes (default=0)
      pb_sv_autossfrom 240 // Minimum # of seconds to wait before requesting next ss
      pb_sv_autossto 360 // Maximum # of seconds to wait before requesting next ss
      pb_sv_ssfloor 1 // Low screenshot filename serial #
      pb_sv_ssceiling 2000 // High screenshot filename serial # - set too high, GOAA gets upset
      pb_sv_ssdelay 10 // Maximum delay client waits before capturing screenshot
      pb_sv_sspath "" // Path where remote screenshots are saved
      pb_sv_ssheight 394 // Requested pixel height of remote screenshots
      pb_sv_ssWidth 790 // Requested pixel width of remote screenshots
      pb_sv_ssSrate 2 // Sample Rate for remote screenshots 1=every pixel, 2=every other pixel, 4=every fourth pixel
      pb_sv_ssxpct 50 // Percentage across screen for remote screenshots, -1 random
      pb_sv_ssypct 50 // Percentage down screen for remote screenshots, -1 random
      pb_sv_SsCmd "" // Filename of system command to run after screenshots

      ;Messages
      pb_sv_task 3 480 say -ACI- LiveSecure AAPG PB
      pb_sv_task 5 480 say Scripts v07.15.2013

      ;MD5Tool Checks
      pb_sv_md5toolfreq 15

      ;WEBTOOL
      ;Change the port to whichever you would like to use. 9000-9005 is recommended for ClanServers.
      ;To access your webtool, type this in your webbrowser: serverIP:PORT. For example, if your
      ;IP is 8.2.0.3, and port 9000 for Webtool, type: 8.2.0.3:9000. Enter your httpKey and you're
      ;good to go.
      ;pb_sv_httpPort 9000
      ;pb_sv_httpAddr "YOUR SERVER IP"
      ;pb_sv_httpRefresh 30
      ;pb_sv_httpKey "WHAT YOU WANT YOUR WEBADMIN PASS TO BE"
      ;pb_sv_httpshowguid 1
      ;pb_sv_httpMaps "Alley Bridge Impact Pipeline Ranch"

      ;PBUCON
      pb_sv_writecfg pbucon.use
      pb_sv_usessionlimit 10
      pb_sv_uconempty
      pb_sv_uconadd 1 69.39.237.211 aci livesecure

      ;Kick off ACI LiveSecure
      pb_sv_task 90 -1 say STRACILIVSEC

      ;Uncomment this statement to use clan tag protection
      ;pb_sv_load protecttag.cfg

      ; *******************************************
      ; PBBans.com PBSV Config
      ; Americas Army Proving Grounds
      ; Last Updated Aug 24th 2013
      ; *******************************************

      ; ------------------------------
      ; General Settings
      ; ------------------------------
      pb_sv_MsgPrefix "PunkBuster Server"
      pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
      pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
      pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)]
      pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
      pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
      pb_sv_PowerMin 10 //[Power Points]
      pb_sv_PowerDef 1 //[Power Points]
      pb_sv_PowerKickLen 5 //[Minutes (default=5)]
      pb_sv_DupNameGrace 0 //[Seconds]
      pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
      pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
      pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; Other Settings
      ; ------------------------------
      pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1) 2=key macro Restrictions]
      pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
      pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogFloor 1 //[Low log filename serial #]
      pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
      pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
      pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
      pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
      pb_sv_ChangePeriod 600 // For pb_sv_ChangeMax
      pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 600 seconds

      ; ------------------------------
      ; Kick Settings
      ; ------------------------------
      pb_sv_KickLen 5 //[Minutes (default=2)]
      pb_sv_ScoreKick 0 //[Min score (negative) ]
      pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
      pb_sv_NoGuidGrace 10 //[Seconds to wait before No GUID kick]

      ; ------------------------------
      ; PBSS Settings
      ; ------------------------------
      pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
      pb_sv_SsFloor 1 //[Low screenshot filename serial #]
      pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
      pb_sv_AutoSsFrom 200 //[Min # of seconds to wait before requesting next ss]
      pb_sv_AutoSsTo 600 //[Max # of seconds to wait before requesting next ss]
      pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
      pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots]
      pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots]
      pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
      pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
      pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
      pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot]
      pb_sv_SsPath "" //[Path where remote screenshots are saved]
      pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
      pb_sv_ssTimeout 300 //[Seconds]

      ; ------------------------------
      ; Web Tool Settings
      ; ------------------------------
      pb_sv_HttpPort 0 //[Port #]
      pb_sv_HttpAddr "" //[External IP Address]
      pb_sv_HttpKey "" //[Password]
      pb_sv_HttpRefresh 30 //[Seconds]
      pb_sv_HttpMaps "" //[Map list (separate by spaces)]
      pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
      pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
      pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
      pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
      pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
      pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
      pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; MD5 Tool Settings
      ; ------------------------------
      pb_sv_md5toolfreq 50 // [Reducing this will increase the scan frequency that can cause lag and also increases the chances being kicked for Ignoring MD5 Tool Queries.]

      ; ------------------------------
      ; Alias Settings (Only for supported games)
      ; ------------------------------
      pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
      pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
      pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command])
      ; ------------------------------
      pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub (Do not remove. Will cause servers to appear as inactive when empty for long periods of time)
      pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily (More dependable than UCON system)

      ; ------------------------------
      ; Badname List (pb_sv_badname [grace_period_secs] [disallowed text])
      ; ------------------------------
      pb_sv_badnameempty
      ;pb_sv_badname 10 server // Sample

      ; ------------------------------
      ; IP Guard
      ; ------------------------------
      ;pb_sv_ipguard 128.0.0.1 // Sample

      ; ------------------------------
      ; Protected Tags
      ; ------------------------------
      pb_sv_protecttag 1 PBSTAFF
      pb_sv_protecttag 1 PBBans
      ; ------------------------------
      ; Load Ban List
      ; ------------------------------
      pb_sv_banempty
      pb_sv_banload

      ; ------------------------------
      ; Load IP Bans
      ; ------------------------------
      ;pb_sv_banmask "128.0.0.1" // Sample

      ; ------------------------------
      ; PB UCON Settings / Lists
      ; ------------------------------
      pb_sv_usessionlimit 10
      pb_sv_ucontimeout 300
      pb_sv_uconempty
      pb_sv_uconadd 1 69.65.22.152 "pbbhub2-1" "pbbanshub"
      pb_sv_uconadd 1 69.65.22.153 "pbbhub2-2" "pbbanshub"
      pb_sv_uconadd 1 69.65.22.154 "pbbhub2-3" "pbbanshub"

      pb_sv_uconadd 1 66.55.152.232 pbbhub3-1 pbbanshub
      pb_sv_uconadd 1 66.55.152.233 pbbhub3-2 pbbanshub
      pb_sv_uconadd 1 66.55.152.234 pbbhub3-3 pbbanshub

      ; ------------------------------
      ; PB UCON Ignore List (Prevents UCON users from sending various commands)
      ; ------------------------------
      pb_sv_uconignoreempty
      pb_sv_uconignore quit
      pb_sv_uconignore pb_sv_md5toolfreq
      pb_sv_uconignore pb_sv_guidrelax

      ; ------------------------------
      ; Exec Configs
      ; ------------------------------
      ; pb_sv_load pbsvuser.cfg
      ; pb_sv_load pbsvlog.cfg

      ; ------------------------------
      ; Misc
      ; ------------------------------
      ;pb_sv_writecfg pbucon.use // Enables UCON in case the server removes the file for any reason.

      pb_sv_USessionLimit 9
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 85.114.136.131 ggc_85.114.136.131 aa4
      pb_sv_uconadd 1 85.114.136.132 ggc_85.114.136.132 aa4

      ;PBUCON
      pb_sv_writecfg pbucon.use
      pb_sv_usessionlimit 10
      pb_sv_uconempty
      pb_sv_uconadd 1 69.39.237.211 aci livesecure

      pb_sv_usessionlimit 9

      pb_sv_ucontimeout 300

      pb_sv_uconmaxsendrate 16

      pb_sv_uconadd 1 85.114.136.131 ggc_85.114.136.131 aa4

      pb_sv_uconadd 1 85.114.136.132 ggc_85.114.136.132 aa4

      pb_sv_uconignoreempty

      need help