pbsv.cfg

      hi all i streaming now to aci and GGC and i delete pbucon all of them and this i have now in pbvuser

      ;Update PB first
      pb_sv_update

      ;Stream to ACI
      pb_sv_logaddr "69.39.237.211"
      pb_sv_logport 13750
      pb_sv_loguser "AAPGACI"
      pb_sv_logpw ""





      ;Messages
      pb_sv_task 4 480 say Server is cheat protected by -ACI-LiveSecure
      pb_sv_task 3 480 say -ACI- LiveSecure AAPG PB
      pb_sv_task 5 480 say Scripts v07.15.2013

      ;Kick off ACI LiveSecure
      pb_sv_task 90 -1 say STRACILIVSEC

      Auto Generated by PunkBuster Server
      ; Some of the following settings may not apply,
      ; consult manuals at evenbalance.com for full documentation
      pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
      pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
      pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
      pb_sv_KickLen 5 //[Minutes (default=2)]
      pb_sv_CvarFreq 6 //[# of range checks per minute]
      pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
      pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
      pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
      pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
      pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
      pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
      pb_sv_SsFloor 1 //[Low screenshot filename serial #]
      pb_sv_SsCeiling 1500 //[High screenshot filename serial #]
      pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
      pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots]
      pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots]
      pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
      pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
      pb_sv_SsSrate 2 //[Sample Rate for remote screenshots]
      pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot]
      pb_sv_SsPath "" //[Path where remote screenshots are saved]
      pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss]
      pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss]
      pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
      pb_sv_ssTimeout 300 //[Seconds]
      pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
      pb_sv_PowerMin 10 //[Power Points]
      pb_sv_PowerDef 1 //[Power Points]
      pb_sv_PowerKickLen 5 //[Minutes (default=5)]
      pb_sv_HttpPort 0 //[Port #]
      pb_sv_HttpAddr "" //[External IP Address]
      pb_sv_HttpRefresh 30 //[Seconds]
      pb_sv_HttpKey "" //[Key]
      pb_sv_HttpMaps "" //[Map list (separate by spaces)]
      pb_sv_ScoreKick 0 //[Min score (negative)]
      pb_sv_ChangePeriod 600 //[Seconds]
      pb_sv_ChangeMax 5 //[Max name changes allowed]
      pb_sv_DupNameGrace 0 //[Seconds]
      pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
      pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
      pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
      pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
      pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
      pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
      pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
      pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
      pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
      pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]
      pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
      pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
      pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogFloor 1 //[Low log filename serial #]
      pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
      pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
      pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
      pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
      pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
      pb_sv_NoGuidGrace 10 //[Seconds to wait before No GUID kick]
      pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
      pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
      pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
      pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)
      pb_sv_task 0 86400 pb_sv_update

      ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

      ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
      pb_sv_cvarempty

      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"

      pb_sv_USessionLimit 9
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 85.114.136.131 ggc_85.114.136.131 aa4
      pb_sv_uconadd 1 85.114.136.132 ggc_85.114.136.132 aa4

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von „SilverStone“ ()

      hi all again :(we get new update at aapg and now are punkbuster and ggc and aci off?? I did stream perfect in 1-2 mon but now are that off need help .whats wrong now??
      hi all all working again :(was my wrong I did forget the button at gameservers :( all working now but now I will have help whit Admin Greeting oh can I setup that

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von „SilverStone“ ()