Server no streaming by GGC

      ;Auto Generated by PunkBuster Server
      ; Some of the following settings may not apply,
      ; consult manuals at evenbalance.com for full documentation
      pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
      pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
      pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
      pb_sv_KickLen 0 //[Minutes (default=2)]
      pb_sv_CvarFreq 6 //[# of range checks per minute]
      pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
      pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
      pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
      pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
      pb_sv_CQC 0 //[0=No, 1=Yes (default=1)]
      pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
      pb_sv_SsFloor 1 //[Low screenshot filename serial #]
      pb_sv_SsCeiling 6000 //[High screenshot filename serial #]
      pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
      pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
      pb_sv_SsHeight 200 //[Requested pixel height of remote screenshots]
      pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
      pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
      pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
      pb_sv_SsDelay 10 //[Maximum delay client waits before capturing screenshot]
      pb_sv_SsPath "" //[Path where remote screenshots are saved]
      pb_sv_AutoSsFrom 240 //[Min # of seconds to wait before requesting next ss]
      pb_sv_AutoSsTo 360 //[Max # of seconds to wait before requesting next ss]
      pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
      pb_sv_ssTimeout 300 //[Seconds]
      pb_sv_Sleep 100 //[# of Milliseconds (default=60)]
      pb_sv_PowerMin 10 //[Power Points]
      pb_sv_PowerDef 1 //[Power Points]
      pb_sv_PowerKickLen 5 //[Minutes (default=5)]
      pb_sv_HttpPort 0 //[Port #]
      pb_sv_HttpAddr "" //[External IP Address]
      pb_sv_HttpRefresh 30 //[Seconds]
      pb_sv_HttpKey "" //[Key]
      pb_sv_HttpMaps "" //[Map list (separate by spaces)]
      pb_sv_ScoreKick 0 //[Min score (negative)]
      pb_sv_ChangePeriod 900 //[Seconds]
      pb_sv_ChangeMax 50 //[Max name changes allowed]
      pb_sv_DupNameGrace 1 //[Seconds]
      pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
      pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
      pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
      pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
      pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
      pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
      pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
      pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
      pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
      pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]
      pb_sv_Restrictions 2 //[0=No, 1=Yes (default=1)]
      pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
      pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogFloor 1 //[Low log filename serial #]
      pb_sv_MinName 3 //[Min Characters in Player name (default=0)]
      pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
      pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
      pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
      pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
      pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
      pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
      pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
      pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
      pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)

      ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

      ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
      pb_sv_cvarempty

      ;PB UCON Settings / Lists
      pb_sv_usessionlimit 8
      pb_sv_ucontimeout 300
      pb_sv_uconmaxsendrate 16
      pb_sv_uconempty
      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
      pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.235" "pbbhub3-4" "pbbanshub"
      pb_sv_uconignoreempty
      pb_sv_uconignore "admin.shutdown"
      pb_sv_uconignore "pb_sv_md5toolfreq"
      pb_sv_uconignore "pb_sv_guidrelax"

      pb_sv_USessionLimit 9
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 31.214.160.253 ggc bf3
      take this line

      pb_sv_uconadd 1 31.214.160.253 ggc bf3

      and place it in with these

      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
      pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.235" "pbbhub3-4" "pbbanshub"
      pb_sv_uconignoreempty


      so it would look like this

      ;PB UCON Settings / Lists
      pb_sv_usessionlimit
      12
      pb_sv_ucontimeout 300
      pb_sv_uconmaxsendrate 16
      pb_sv_uconempty
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 31.214.160.253 ggc bf3

      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
      pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.235" "pbbhub3-4" "pbbanshub"
      pb_sv_uconignoreempty
      pb_sv_uconignore "admin.shutdown"
      pb_sv_uconignore "pb_sv_md5toolfreq"
      pb_sv_uconignore "pb_sv_guidrelax"


      The posted content from the OP is not the right file. I mean thats not the pbsv.cfg
      It looks like the pbucon.use file, wich have to be blank in a fresh server. This will get filled if the Server is streaming automatically.
      So, please take the lines from pipes, and add these in the pbsv.cfg file on your FTP. Under the same header, almost on the bottom of the page (Header: ;PB UCON Settings / Lists)
      Hello! Now its lokks like pbsv.cfg, but dosnt streaming by GGC:
      ;Auto Generated by PunkBuster Server
      ; Some of the following settings may not apply,
      ; consult manuals at evenbalance.com for full documentation
      pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
      pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
      pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
      pb_sv_KickLen 0 //[Minutes (default=2)]
      pb_sv_CvarFreq 6 //[# of range checks per minute]
      pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
      pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
      pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
      pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
      pb_sv_CQC 0 //[0=No, 1=Yes (default=1)]
      pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
      pb_sv_SsFloor 1 //[Low screenshot filename serial #]
      pb_sv_SsCeiling 6000 //[High screenshot filename serial #]
      pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
      pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
      pb_sv_SsHeight 200 //[Requested pixel height of remote screenshots]
      pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
      pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
      pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
      pb_sv_SsDelay 10 //[Maximum delay client waits before capturing screenshot]
      pb_sv_SsPath "" //[Path where remote screenshots are saved]
      pb_sv_AutoSsFrom 240 //[Min # of seconds to wait before requesting next ss]
      pb_sv_AutoSsTo 360 //[Max # of seconds to wait before requesting next ss]
      pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
      pb_sv_ssTimeout 300 //[Seconds]
      pb_sv_Sleep 100 //[# of Milliseconds (default=60)]
      pb_sv_PowerMin 10 //[Power Points]
      pb_sv_PowerDef 1 //[Power Points]
      pb_sv_PowerKickLen 5 //[Minutes (default=5)]
      pb_sv_HttpPort 0 //[Port #]
      pb_sv_HttpAddr "" //[External IP Address]
      pb_sv_HttpRefresh 30 //[Seconds]
      pb_sv_HttpKey "" //[Key]
      pb_sv_HttpMaps "" //[Map list (separate by spaces)]
      pb_sv_ScoreKick 0 //[Min score (negative)]
      pb_sv_ChangePeriod 900 //[Seconds]
      pb_sv_ChangeMax 50 //[Max name changes allowed]
      pb_sv_DupNameGrace 1 //[Seconds]
      pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
      pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
      pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
      pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
      pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
      pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
      pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
      pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
      pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
      pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
      pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]
      pb_sv_Restrictions 2 //[0=No, 1=Yes (default=1)]
      pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
      pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogFloor 1 //[Low log filename serial #]
      pb_sv_MinName 3 //[Min Characters in Player name (default=0)]
      pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
      pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
      pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
      pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
      pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
      pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
      pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
      pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
      pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)

      ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

      ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
      pb_sv_cvarempty

      ;PB UCON Settings / Lists
      pb_sv_usessionlimit 12
      pb_sv_ucontimeout 300
      pb_sv_uconmaxsendrate 16
      pb_sv_uconempty
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 31.214.160.253 ggc bf3
      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
      pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.235" "pbbhub3-4" "pbbanshub"
      pb_sv_uconignoreempty
      pb_sv_uconignore "admin.shutdown"
      pb_sv_uconignore "pb_sv_md5toolfreq"
      pb_sv_uconignore "pb_sv_guidrelax"
      No, you just posted the pbucon.use.
      This here is a pbsv.cfg:


      ; *******************************************
      ; PBSV Config -GGC- Stream.net
      ; Battlefield 4
      ; Last Updated Nov 14th 2015
      ; *******************************************

      ; ------------------------------
      ; General Settings
      ; ------------------------------
      pb_sv_MsgPrefix "PunkBuster Server"
      pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
      pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
      pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)]
      pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
      pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
      pb_sv_PowerMin 10 //[Power Points]
      pb_sv_PowerDef 1 //[Power Points]
      pb_sv_PowerKickLen 5 //[Minutes (default=5)]
      pb_sv_DupNameGrace 0 //[Seconds]
      pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
      pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
      pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; Other Settings
      ; ------------------------------
      pb_sv_Restrictions 2 //[Kick for Restrictions 0=No, 1=Yes (default=1) 2=key macro Restrictions]
      pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
      pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
      pb_sv_LogFloor 1 //[Low log filename serial #]
      pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
      pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
      pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
      pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
      pb_sv_ChangePeriod 600 // For pb_sv_ChangeMax
      pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 600 seconds

      ; ------------------------------
      ; Kick Settings
      ; ------------------------------
      pb_sv_KickLen 5 //[Minutes (default=2)]
      pb_sv_ScoreKick 0 //[Min score (negative) ]
      pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
      pb_sv_NoGuidGrace 10 //[Seconds to wait before No GUID kick]

      ; ------------------------------
      ; PBSS Settings
      ; ------------------------------
      pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
      pb_sv_SsFloor 1 //[Low screenshot filename serial #]
      pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
      pb_sv_AutoSsFrom 200 //[Min # of seconds to wait before requesting next ss]
      pb_sv_AutoSsTo 600 //[Max # of seconds to wait before requesting next ss]
      pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
      pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
      pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
      pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
      pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
      pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
      pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot]
      pb_sv_SsPath "" //[Path where remote screenshots are saved]
      pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
      pb_sv_ssTimeout 300 //[Seconds]

      ; ------------------------------
      ; Web Tool Settings
      ; ------------------------------
      pb_sv_HttpPort 0 //[Port #]
      pb_sv_HttpAddr "" //[External IP Address]
      pb_sv_HttpKey "" //[Password]
      pb_sv_HttpRefresh 30 //[Seconds]
      pb_sv_HttpMaps "" //[Map list (separate by spaces)]
      pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
      pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
      pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
      pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
      pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
      pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
      pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
      pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; MD5 Tool Settings
      ; ------------------------------
      pb_sv_md5toolfreq 50 // [Reducing this will increase the scan frequency that can cause lag and also increases the chances being kicked for Ignoring MD5 Tool Queries.]

      ; ------------------------------
      ; Alias Settings (Only for supported games)
      ; ------------------------------
      pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
      pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
      pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
      pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]

      ; ------------------------------
      ; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command])
      ; ------------------------------
      pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub (Do not remove. Will cause servers to appear as inactive when empty for long periods of time)
      pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily (More dependable than UCON system)

      ; ------------------------------
      ; Badname List (pb_sv_badname [grace_period_secs] [disallowed text])
      ; ------------------------------
      pb_sv_badnameempty
      ;pb_sv_badname 10 server // Sample

      ; ------------------------------
      ; IP Guard
      ; ------------------------------
      ;pb_sv_ipguard 128.0.0.1 // Sample

      ; ------------------------------
      ; Protected Tags
      ; ------------------------------
      pb_sv_protecttag 1 PBSTAFF
      pb_sv_protecttag 1 PBBans

      ; ------------------------------
      ; Load Ban List
      ; ------------------------------
      pb_sv_banempty
      pb_sv_banload

      ; ------------------------------
      ; Load IP Bans
      ; ------------------------------
      ;pb_sv_banmask "128.0.0.1" // Sample

      ; ------------------------------
      ; PB UCON Settings / Lists
      ; ------------------------------
      pb_sv_usessionlimit 12
      pb_sv_ucontimeout 300
      pb_sv_uconmaxsendrate 16
      pb_sv_uconempty
      pb_sv_ProtectTag 1 GGC
      pb_sv_uconadd 1 31.214.160.253 ggc bf3
      pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
      pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
      pb_sv_uconadd 1 "66.55.152.235" "pbbhub3-4" "pbbanshub"
      pb_sv_uconignoreempty
      pb_sv_uconignore "admin.shutdown"
      pb_sv_uconignore "pb_sv_md5toolfreq"
      pb_sv_uconignore "pb_sv_guidrelax"
      ; ------------------------------
      ; PB UCON Ignore List (Prevents UCON users from sending various commands)
      ; ------------------------------
      pb_sv_uconignoreempty
      pb_sv_uconignore admin.shutdown
      pb_sv_uconignore pb_sv_md5toolfreq
      pb_sv_uconignore pb_sv_guidrelax

      ; ------------------------------
      ; Exec Configs
      ; ------------------------------
      ; pb_sv_load pbsvuser.cfg
      ; pb_sv_load pbsvlog.cfg

      ; ------------------------------
      ; Misc
      ; ------------------------------
      pb_sv_writecfg pbucon.use // Enables UCON in case the server removes the file for any reason.